Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
- 13. Body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. Cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. Front grille
   13.10. Front bumper
   13.11. Rear bumper
   13.12. Forward wing
   13.13. Door upholstery
   13.14. Lock, cylinder of the lock and handle of opening of a door
   13.15. Door glass
   13.16. Window regulator
   13.17. External mirror
   13.18. Doors
   13.19. Trunk lid
   13.20. Luggage carrier lock
   13.21. Cable of opening of the lock of a luggage carrier
   13.22. Replacement of racks of support of a back door
   13.23. Back door
   13.24. Lock of a back door, external handle and cylinder of the lock
   13.25. Casings of a steering column
   13.26. Central console
   13.27. Dashboard elements
   13.28. Dashboard
   13.29. Air inlet lattice
   13.30. Forward seats
+ 14. Electric equipment





13.27. Dashboard elements

GENERAL INFORMATION

Dashboard details on cars from 1990 to 1994

1 – dashboard
2 – decorative slip
combinations of devices
3 – central clamp
4 – left clamp
5 – right clamp
6 – holder of bottles
7 – ashtray
8 – finishing of the central part
dashboards

Dashboard details on cars since 1995

1 – dashboard
2 – left lattice of a heater
3 – central lattice of a heater
4 – heater lattice
5 – right lattice of ventilation
6 – decorative cap
7 – arm of a ware box
8 – ware box
9 – lock
10 – decorative slip
combinations of devices
11 – central lattice of ventilation
12 – top central decorative overlay of the dashboard
13 – lower central decorative overlay of the dashboard
14 – holder of bottles
15 – left lower finishing of the dashboard
16 – left lattice of ventilation
17 – arm of the holder of bottles
18 – holder of bottles

Arrangement of the decorative caps closing screws of fastening of the dashboard

FINISHING OF THE CENTRAL PART OF THE DASHBOARD

PERFORMANCE ORDER
Models from 1990 to 1994
1. Remove from the dashboard the holder of bottles and an ashtray.
2. Unscrew screws of fastening of a decorative overlay of the central part of the dashboard.
3. Installation is made in sequence, the return to removal.
Models since 1995
4. Take the holder of bottles and unscrew the opened two screws of fastening of the top and lower central finishing of the dashboard (are specified by shooters).
5. Remove the top central finishing of the dashboard.
6. Remove the lower central finishing of the dashboard.
7. Installation is made in sequence, the return to removal.

DECORATIVE OVERLAY OF THE COMBINATION OF DEVICES

PERFORMANCE ORDER
Models from 1990 to 1994
1. Remove a decorative overlay of the central part of the dashboard.
2. Having pulled on itself, take the left and central nozzles of system of ventilation from the dashboard.
3. Take the switch of provision of a mirror and the control switch of installation of height of the car from a decorative overlay of a combination of devices and disconnect from them electric sockets.
4. Unscrew screws of fastening of a decorative overlay of a combination of devices.
5. Through openings for the holder of bottles unscrew screws of the top fastening of a heater to the dashboard.
6. Unscrew two screws from the top part of the holder of bottles.
7. Unscrew screws of fastening of the lower finishing of the dashboard from the driver for access to the electric components located below a combination of devices on models from 1990 to 1994.
8. Remove a decorative overlay of a combination of devices.
9. Installation is made in sequence, the return to removal.
Models since 1995
10. Unscrew 4 screws of fastening of a decorative overlay of a combination of devices (are specified by shooters), incline a steering wheel down, take the holder of bottles.
11. Disconnect electric sockets from a reverse side of a decorative overlay of a combination of devices.
12. Installation is made in sequence, the return to removal.