Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
- 13. Body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. Cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. Front grille
   13.10. Front bumper
   13.11. Rear bumper
   13.12. Forward wing
   13.13. Door upholstery
   13.14. Lock, cylinder of the lock and handle of opening of a door
   13.15. Door glass
   13.16. Window regulator
   13.17. External mirror
   13.18. Doors
   13.19. Trunk lid
   13.20. Luggage carrier lock
   13.21. Cable of opening of the lock of a luggage carrier
   13.22. Replacement of racks of support of a back door
   13.23. Back door
   13.24. Lock of a back door, external handle and cylinder of the lock
   13.25. Casings of a steering column
   13.26. Central console
   13.27. Dashboard elements
   13.28. Dashboard
   13.29. Air inlet lattice
   13.30. Forward seats
+ 14. Electric equipment


3a942d17

13.10. Front bumper

GENERAL INFORMATION

Details of a front bumper of cars from 1990 to 1994

 
1 – bumper beam
2 – power absorber
3 – overlay of a bumper
4 – molding
5 – arm
6 – arm
7 – top central clamp
8 – top lateral clamp
9 – lower clamp

Details of a front bumper of cars since 1995

 
1 – overlay of a bumper
2 – bumper beam
3 – arm
4 – arm
5 – back fastening
6 – power absorber
7 – clamp
8 – lower arms of a beam

Arrangement of lateral screws of fastening of an overlay of a bumper


Fastening of a reverse side of an overlay of a bumper


Arrangement of plastic connectors of fastening of the top part of an overlay of a bumper


Arrangement of the left top bolts of fastening of a bumper


Arrangement of the right top bolts of fastening of a bumper


PERFORMANCE ORDER
1. Lift forward part of the car and record on supports. Remove wheels.
2. Remove forward part of a mudguard of the engine and two small lateral mudguards.
3. Unscrew bolts and screws and remove an overlay of a bumper (see rice. Arrangement of lateral screws of fastening of an overlay of a bumper, Fastening of a reverse side of an overlay of a bumper, Arrangement of plastic connectors of fastening of the top part of an overlay of a bumper).
4. Unscrew bolts and remove a bumper from the car (see rice. Arrangement of the left top bolts of fastening of a bumper, Arrangement of the right top bolts of fastening of a bumper).
5. Installation is made in sequence, the return to removal.