Subaru Legacy

since 1990-1998 release

Repair and operation of the car

Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
- 13. Body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. Cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. Front grille
   13.10. Front bumper
   13.11. Rear bumper
   13.12. Forward wing
   13.13. Door upholstery
   13.14. Lock, cylinder of the lock and handle of opening of a door
   13.15. Door glass
   13.16. Window regulator
   13.17. External mirror
   13.18. Doors
   13.19. Trunk lid
   13.20. Luggage carrier lock
   13.21. Cable of opening of the lock of a luggage carrier
   13.22. Replacement of racks of support of a back door
   13.23. Back door
   13.24. Lock of a back door, external handle and cylinder of the lock
   13.25. Casings of a steering column
   13.26. Central console
   13.27. Dashboard elements
   13.28. Dashboard
   13.29. Air inlet lattice
   13.30. Forward seats
+ 14. Electric equipment

13.20. Luggage carrier lock

GENERAL INFORMATION

Arrangement of elements of the lock of a luggage carrier, cylinder of the lock and cable of opening of the lock

1 – decorative overlay of the handle of opening
luggage carrier lock
2 – handle of opening of the lock of a luggage carrier
3 – cable
4 – bracket of fastening of a cable
5 – folding shutter of a fuel-filling mouth
6 – consolidation
7 – shock plate
8 – lock clamp
9 – pin

10 – hinge
11 – spring
12 – drainage tube
13 – trunk lid hinge
14 – lock
15 – draft
16 – casing
17 – torsions
18 – trunk lid
19 – consolidation
20 – lock cylinder

PERFORMANCE ORDER

1. Open a trunk lid and remove finishing of a luggage carrier about the luggage carrier lock. Using a marker, note a luggage carrier lock arrangement.
	2. Before removal of the lock of a luggage carrier remove the draft connecting the lock to the lock cylinder.
3. Disconnect a cable of opening of a trunk lid from fastening brackets to a trunk lid.
4. Unscrew two bolts of fastening of the lock, disconnect a cable from the lock and remove the lock of opening of a luggage carrier.
	5. Installation is made in sequence, the return to removal. Thus grease working surfaces of the lock of a luggage carrier.