Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
- 13. Body
13.1. Introduction
13.2. Care of a body
13.3 Care of an upholstery and rugs
13.4. Repair of insignificant damages of a body
13.5. Repair of strong damages of a body
13.6. Cowl
13.7. Replacement of the lock of a cowl
13.8. Replacement of a cable of the lock of a cowl
13.9. Front grille
13.10. Front bumper
13.11. Rear bumper
13.12. Forward wing
13.13. Door upholstery
13.14. Lock, cylinder of the lock and handle of opening of a door
13.15. Door glass
13.16. Window regulator
13.17. External mirror
13.18. Doors
13.19. Trunk lid
13.20. Luggage carrier lock
13.21. Cable of opening of the lock of a luggage carrier
13.22. Replacement of racks of support of a back door
13.23. Back door
13.24. Lock of a back door, external handle and cylinder of the lock
13.25. Casings of a steering column
13.26. Central console
13.27. Dashboard elements
13.28. Dashboard
13.29. Air inlet lattice
13.30. Forward seats
+ 14. Electric equipment
|
Removal
| PERFORMANCE ORDER |
| 1. Open a trunk lid. Enclose pure rags under trunk lid corners to protect a paint and varnish covering of the car at removal of a trunk lid. |
| 2. Disconnect electric sockets from a trunk lid. |
|
3. Using a marker, note the provision of bolts of fastening of hinges of a trunk lid. |
| 4. Unscrew bolts and remove a trunk lid from hinges. |
|
Installation
Installation is made in sequence, the return to removal.
Adjustment
| PERFORMANCE ORDER |
| 1. After installation of a trunk lid check that in a closed position a gap between a trunk lid and elements of a body of the car everywhere the identical. |
| 2. If necessary adjust the provision of a trunk lid for what weaken bolts of fastening and, moving a cover within the extended installation openings, find the demanded situation. |
|
|
|
