Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
- 10. Brake system
   10.1. Introduction
   10.2. Technical characteristics
   10.3. Replacement of brake shoes on disk brakes
   10.4. Support of disk brakes
   10.5. Brake disk
   10.6. Replacement of brake shoes of drum brakes
   10.7. Working brake cylinder
   10.8. Main brake cylinder
   10.9. Brake pipelines and hoses
   10.10. Replacement of the regulator of pressure
   10.11. Pumping of hydraulic brake system
   10.12. Adjustment of the emergency brake
   10.13. Replacement of a cable of the emergency brake
   10.14. Replacement of brake shoes of the emergency brake on back disk brakes
   10.15. Additional brake system
   10.16. Vacuum amplifier of brakes
   10.17. Stoplight switch
   10.18. Anti-blocking system of brakes (ABS)
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17

10.4. Support of disk brakes

GENERAL INFORMATION

Prevention

During the work of brake shoes brake dust which contains asbestos, unhealthy is formed. Therefore when cleaning a support do not use compressed air and do not inhale dust.


Removal

PERFORMANCE ORDER
1. Unscrew a bolt and disconnect a brake hose from a support. For an exception of an effluence of brake fluid, close an opening of a brake hose a stopper.
2. Replacement of a brake support is a part of procedure of replacement of brake shoes (see subsection 10.3).

Installation

PERFORMANCE ORDER
Installation is made in sequence, the return to removal. Remove air from brake system.