Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
- 1.1. Identification numbers
   1.2. Governing bodies and control devices
   - 1.3. Switches of lighting, turns, washer and glass cleaner
      1.3.1. Switch of lighting, turns and brightness of lighting
      1.3.2. Indexes of turns
      1.3.3. Lighting brightness control
      1.3.4. Switch of a parking light
      1.3.5. Switch of forward fog lights
      1.3.6. Switch of back fog lamps
      1.3.7. The proofreader of light of headlights with manual adjustment
      1.3.8. Switch of a cleaner and washer of glasses
      1.3.9. The switch of a cleaner and washer back flew down (Station wagon)
      1.3.10. Screen wiper anti-icer
      1.3.11. Heater of back glass
      1.3.12. Washer of headlights
   1.4. Catalytic converter
   1.5. System of ventilation and air conditioning
   1.6. System of climate control
   1.7. System cruise control
   1.8. Mechanical transmission
   1.9. Automatic transmission
   + 1.10. Forward seats
   1.11. Arrangement and power of bulbs
   + 1.12. Safety locks and electric chains
   1.13. Bases of safe operation of the car
   1.14. Wheels and tires
   1.15. Corners of installation of wheels
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17

1.3.7. The proofreader of light of headlights with manual adjustment

GENERAL INFORMATION

Rotation of the handle corrects a tilt angle of a beam of light of headlights depending on loading of the car. Turn of the handle counterclockwise lowers a beam of light down (when loading the car) and vice versa, turn of the handle clockwise lifts a beam of light of headlights. The starting position "0" corresponds to loading of the car only by the driver and the passenger on forward sitting.

Provisions of the proofreader of light of headlights depending on loading of the car

  – 0 sitting lobbies are occupied;
  – 1 are occupied all of sitting;
  – 2 are occupied all of sitting and the luggage carrier is partially loaded;
  – 3 sitting of the driver is occupied and the luggage carrier is completely loaded.