Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
- 1.1. Identification numbers
   1.2. Governing bodies and control devices
   + 1.3. Switches of lighting, turns, washer and glass cleaner
   1.4. Catalytic converter
   1.5. System of ventilation and air conditioning
   1.6. System of climate control
   1.7. System cruise control
   1.8. Mechanical transmission
   1.9. Automatic transmission
   + 1.10. Forward seats
   1.11. Arrangement and power of bulbs
   + 1.12. Safety locks and electric chains
   1.13. Bases of safe operation of the car
   1.14. Wheels and tires
   1.15. Corners of installation of wheels
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17

1.6. System of climate control

GENERAL INFORMATION

Prevention

Use an automatic control system of climate control only during the operation of the engine.


  1 -  switch of adjustment of temperature;
  2 - indicator;
  3 - AUTO switch;
  4 - OFF switch;
  5 - switch of external air temperature;
  6 - conditioner switch;
  7 - air stream switch;
  8 - fan speed switch;
  9 - air supply choice button;
  10 - having blown in a windshield;
 11 – sensor

During the work of system in the AUTO mode if air temperature in salon decreases up to the demanded temperature, the compressor of the conditioner is automatically switched off. For effective dispersion of condensate from an internal surface of glasses in cold weather, include the A/C mode.

The system Climate of Control automatically operates the air temperature, fan speed, distribution of a stream of air, and the conditioner compressor. Temperature can be established with an accuracy of 0,5 °C within 18-32 °C.

AUTO mode switch

The system Climate of Control automatically operates air temperature in salon of the car in the AUTO mode. When pressing the AUTO button, the control lamp of AUTO lights up.

Manual installation of an operating mode

When the System Climate of Control works in the AUTO mode, pressing the buttons,
, or switch off manual installation of the mode, thus the control lamp of MANUAL lights up.
When buttons, or are pressed, the corresponding functions cope independently while automatic control of other functions is supported. To return system in the automatic mode, press the AUTO button.

OFF switch

System the Climate of Control is switched off by the OFF button (the compressor and the fan). When OFF is pressed, the external gate of an air vent will automatically be closed (the system of air supply will work in the air recirculation mode.

Switch of distribution of a stream of air

ventilation
air supply through dashboard nozzles
two levels
air supply through nozzles of the dashboard and in feet
down
air supply in feet
down and on a windshield
air supply through nozzles to a windshield and in feet

Switch of adjustment of temperature

1 – to press for increase in temperature

2 – switch of adjustment of temperature

3 – to press for reduction of temperature


Prevention

Installation within a year about 25 °C is recommended.


Installation of temperature remains even after ignition switching off. However, if wires are disconnected from the accumulator, temperature will be established automatically on 25 °C.

Temperature is desirable the switch of regulation of temperature is installed by pressing: for a raising of temperature press the top end of the switch, and the low end of the switch, for reduction of temperature
One pressing of the switch changes temperature to 0,5 °C. Temperature can be established within 18–32 °C.

Switching of speed of the fan

The switch of speed of the fan has 5 provisions: situation AUTO and 4 various provisions of speed of the fan.
For a choice of desirable speed of the fan, consistently press the button. Thus there is a consecutive increase, and then reduction of speed of the fan, to the AUTO mode.

Ventilation mode choice

The choice of the mode of ventilation occurs when pressing the button

There is an air circulation in salon of the car, without intake of fresh air. This mode is used for fast heating or cooling of air in salon of the car. Indication of the mode is determined by fire of a control lamp.
Supply of fresh external air in salon of the car. When the air conditioning system works in the AUTO mode, the mode of supply of fresh air automatically joins. Indication of the mode is determined by fire of a control lamp.

The switch of removal of condensate from a windshield
For effective dispersion of condensate from an internal surface of glasses in cold weather, include the mode, thus irrespective of an operating mode of the conditioner, the stream of air is directed to a windshield and lateral glasses, thus the control lamp lights up. After removal of condensate from a windshield, set an operating mode of the conditioner in the AUTO mode.