since 1990-1998 release
Repair and operation of the car
Subaru of Legasi
- 1.1. Identification numbers
1.2. Governing bodies and control devices
+ 1.3. Switches of lighting, turns, washer and glass cleaner
1.4. Catalytic converter
1.5. System of ventilation and air conditioning
1.6. System of climate control
1.7. System cruise control
1.8. Mechanical transmission
1.9. Automatic transmission
+ 1.10. Forward seats
1.11. Arrangement and power of bulbs
+ 1.12. Safety locks and electric chains
1.13. Bases of safe operation of the car
1.14. Wheels and tires
1.15. Corners of installation of wheels
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment
Cars with l engines 1,8, 2,0 and 2,2
Cars with engines of 2,5 l
At hit in the catalyst of not burned down fuel there can be an overheat and damage of the catalyst.
Catalytic converter is the device which demands in use the car of attention and care.
Apply only unleaded gasoline.
It is forbidden to apply any additives to engine oil is can lead to serious damage and failure of the catalyst.
Do not force turns of a cranked shaft of the engine.
Do not increase engine turns just before ignition switching off.
Avoid the parking on flammable garbage (dry leaves or a grass) since the fulfilled gases of the engine have high temperature.
Avoid frequent consecutive start-up of the cold engine.
Avoid too long inclusion of a starter during start-up (during start-up there is a fuel injection).
Avoid a fuel reserve expenditure in a tank till the end (uneven supply of fuel leads to an overheat).
Avoid start-up of the engine by pushing or towage (not burned down fuel can get to the catalyst): it is necessary to use a wire for connection of a starter to the auxiliary battery.
All works on servicing have to be carried out in an authorized workshop of firm Subaru according to the frequency ordered by firm. Then you can be sure that all elements of electric equipment, system of injection and ignition work optimum that low indicators of emission of harmful substances are maintained and the durability of catalytic system is provided.