Subaru Legacy

since 1990-1998 release

Repair and operation of the car


Subaru of Legasi
- 1.1. Identification numbers
   1.2. Governing bodies and control devices
   + 1.3. Switches of lighting, turns, washer and glass cleaner
   1.4. Catalytic converter
   1.5. System of ventilation and air conditioning
   1.6. System of climate control
   1.7. System cruise control
   1.8. Mechanical transmission
   1.9. Automatic transmission
   + 1.10. Forward seats
   1.11. Arrangement and power of bulbs
   + 1.12. Safety locks and electric chains
   1.13. Bases of safe operation of the car
   1.14. Wheels and tires
   1.15. Corners of installation of wheels
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17

1.7. System cruise control
GENERAL INFORMATION

Cruise control gives opportunity to remember and support any speed of the movement of a constant, beginning from about 40 km/h to almost maximum.
Cruise control should not be included if the movement with a constant speed is inexpedient (for example, a dense transport stream, plentiful turns, the slippery or dirty road).
In case of an automatic transmission inclusion Cruise control makes sense only at a step of D.

Inclusion of system Cruise control

Control lever system cruise control


1. Move the main CRUISE switch.
2.  Press a pedal of management of fuel supply until the car does not reach to desirable speed.
3.  Move a control lever down to the situation SET, COAST and let out it. Release a pedal of management of fuel supply, thus the car will move with the set speed.

Temporary acceleration

Acceleration by pressing an accelerator pedal is possible. After holiday of a pedal of an accelerator the movement speed which is written down in memory is established before.

For temporary cancellation Cruise control perform works of system the following actions:

  – press a brake pedal;
  – move a control lever to the situation CANCEL;
  – on press a coupling pedal (only cars with a mechanical transmission);
  – neremestit the selector lever in situation N (only cars with an automatic transmission).

Repeated call of the speed which is written down in memory

Move a control lever up to the situation ACCEL, RESUME at a speed over 40 km/h: the movement speed chosen before shutdown is established.
The movement speed brought in memory after switching off of ignition is erased.

Switching off of system Cruise control

Switch off the main switch of system Cruise control.
Turn a key in the ignition lock in the situation ACC.

Increase in speed of the car

Way 1

Move a control lever up to the situation ACCEL, RESUME and hold it until the car does not reach desirable speed.
Step-by-step increase of speed of the movement on 1,6 km/h, can be made by consecutive movement of a control lever up in the situation ACCEL, RESUME. Consistently press the lever until the car does not reach desirable speed.

Way 2

Press a pedal of management of fuel supply to increase car speed.
Move the lever down to the situation SET, COAST once therefore the speed of the movement of the car will be recorded.

Reduction of speed of the car

Way 1

Move a control lever down to the situation SET, COAST and hold it in this situation, before achievement of the demanded car speed.
Step-by-step reduction of speed of the movement by 1,6 km/h, can be made by consecutive movement of a control lever down in the situation SET, COAST. Consistently press the lever until the car does not reach desirable speed.

Way 2

Press a pedal of a brake and slow down the car to the demanded speed.
Move the lever down to the situation SET, COAST once therefore the speed of the movement of the car will be recorded.