Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
- 1.1. Identification numbers
   1.2. Governing bodies and control devices
   - 1.3. Switches of lighting, turns, washer and glass cleaner
      1.3.1. Switch of lighting, turns and brightness of lighting
      1.3.2. Indexes of turns
      1.3.3. Lighting brightness control
      1.3.4. Switch of a parking light
      1.3.5. Switch of forward fog lights
      1.3.6. Switch of back fog lamps
      1.3.7. The proofreader of light of headlights with manual adjustment
      1.3.8. Switch of a cleaner and washer of glasses
      1.3.9. The switch of a cleaner and washer back flew down (Station wagon)
      1.3.10. Screen wiper anti-icer
      1.3.11. Heater of back glass
      1.3.12. Washer of headlights
   1.4. Catalytic converter
   1.5. System of ventilation and air conditioning
   1.6. System of climate control
   1.7. System cruise control
   1.8. Mechanical transmission
   1.9. Automatic transmission
   + 1.10. Forward seats
   1.11. Arrangement and power of bulbs
   + 1.12. Safety locks and electric chains
   1.13. Bases of safe operation of the car
   1.14. Wheels and tires
   1.15. Corners of installation of wheels
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17

1.3.1. Switch of lighting, turns and brightness of lighting

GENERAL INFORMATION

The switch of lighting, turns and brightness of lighting works only at ignition inclusion.

Headlights

For inclusion of headlights, turn the handle on the end of the lever of the switch of turns.

First situation

At installation of the handle in the first situation, the forward dimensional light, back lamps and illumination of registration plate are turned on lighting of the dashboard.

Second situation

At installation of the handle the second situation, joins headlights, lighting of the dashboard, back lamps and illumination of registration plate.


Move the lever forward, thus the driving beam is turned on. At inclusion of a driving beam, on a combination of devices the control bulb lights up.

Light signal

Move the lever on yourself, thus the passing beam is turned on.
If to pull the lever on itself against the stop, the light signal joins.

Move the lever in the direction of a steering wheel. The light signal can be included and at the included indexes of turn. At inclusion of a light signal, on a combination of devices the control bulb lights up.