Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
- 11. Suspension bracket
   11.1. Introduction
   11.2. Technical characteristics
   - 11.3. The lobby is resistant
      11.3.1. Repair of a forward rack
      11.3.2. Forward stabilizer of cross stability
      11.3.3. Lower lever of a forward suspension bracket
      11.3.4. Replacement of the lower hinge of a forward suspension bracket
      11.3.5. Rotary fist
   + 11.4. Rack of a back suspension bracket
   11.5. The air self-leveled suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17



11.3.4. Replacement of the lower hinge of a forward suspension bracket

PERFORMANCE ORDER
1. Lift forward part of the car and record on supports. Remove a forward wheel.
2. Take the forelock of fixing of a nut of the spherical hinge.
3. On some turns unscrew a nut of fastening of the spherical hinge to the lower lever.
4. Using mount, separate the lower lever of a forward suspension bracket from a pin of the spherical hinge.
5. Unscrew a coupling bolt of fastening of the spherical hinge to a rotary fist.
6. Using a screw-driver, expand a groove in a rotary fist and take the spherical hinge from a rotary fist.
7. Remove the ring holding a protective cover of the spherical hinge and remove a protective cover.
8. Fill with greasing a working surface of the spherical hinge and an internal surface of a protective cover of the hinge.
9. Establish a protective cover on the spherical hinge and fix a ring.
10. Install the spherical hinge in a rotary fist and fix a coupling bolt.
11. Install the lever of a forward suspension bracket on the spherical hinge and fix it a nut. Record a nut from an otvorachivaniye the new forelock.