Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
- 11. Suspension bracket
   11.1. Introduction
   11.2. Technical characteristics
   - 11.3. The lobby is resistant
      11.3.1. Repair of a forward rack
      11.3.2. Forward stabilizer of cross stability
      11.3.3. Lower lever of a forward suspension bracket
      11.3.4. Replacement of the lower hinge of a forward suspension bracket
      11.3.5. Rotary fist
   + 11.4. Rack of a back suspension bracket
   11.5. The air self-leveled suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17

11.3.3. Lower lever of a forward suspension bracket

Removal

PERFORMANCE ORDER
1. Lift forward part of the car and record on supports. Remove the corresponding forward wheel.
2. Unscrew draft of the stabilizer of cross stability from the lower lever of a forward suspension bracket.
3. Unscrew a coupling bolt of fastening of the spherical hinge to the lower lever of a forward suspension bracket.
4. Using mount, separate the lower lever from a rotary fist.
5. Unscrew a nut and take a hinged bolt of fastening of forward part of the lower lever.
6. Unscrew the bolts fixing a support of back part of the lower lever.
7. Remove the lower lever of a forward suspension bracket.

Installation

PERFORMANCE ORDER
Installation is made in sequence, the return to removal. Make a final tightening of bolts and nuts after installation of the car on wheels. Check and if necessary, adjust corners of installation of forward wheels.