Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
- 9. Coupling, shaft
   9.1. Technical characteristics
   + 9.2. Coupling
   + 9.3. Driveshaft
   - 9.4. Power shafts
      9.4.1. Forward power shaft
      9.4.2. Back power shaft (models 4WD)
      + 9.4.3. Replacement of protective covers of hinges of equal angular speeds
      9.4.4. External hinge of a power shaft
      9.4.5. Replacement of sealing rings of back differential
      9.4.6. Reverse main gear
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17

9.4.4. External hinge of a power shaft

PERFORMANCE ORDER
1. Remove a power shaft.
2. Remove the internal hinge and a protective cover from a power shaft.
3. Remove collars of fastening of a protective cover of the external hinge of a power shaft.
4. Remove a protective cover of the external hinge of a power shaft.
5. Using solvent, wash out details of the external hinge and check their state.
6. Establish a new protective cover on a power shaft.
7. Fill greasing the external hinge of a power shaft and a protective cover of the hinge.
8. Establish a protective cover on the external hinge and fix collars.
9. Install the internal hinge of a power shaft and a protective cover.
10. Establish a power shaft.