Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
- 9. Coupling, shaft
   9.1. Technical characteristics
   + 9.2. Coupling
   - 9.3. Driveshaft
      9.3.1. Removal and installation of the driveshaft
      9.3.2. Replacement of the central bearing of the driveshaft
      9.3.3. Replacement of a sealing ring of the main transfer
   + 9.4. Power shafts
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17



9.3.2. Replacement of the central bearing of the driveshaft

PERFORMANCE ORDER
1. Remove the driveshaft.
2. Fix the driveshaft in a vice with soft sponges.
3. Note the mutual provision of a flange of forward part of the driveshaft and hinge of back part of the driveshaft.
4. Unscrew bolts of fastening of back part of the driveshaft to a flange of forward part of the driveshaft and remove back part of the driveshaft.
5. Note the mutual provision of a flange and forward part of the driveshaft.
6. Before unscrewing of a nut of fastening of a flange to forward part of a power shaft, using a drift, unbend the fixing nut fillet.
7. Unscrew the nut fixing a flange to forward part of the driveshaft.
.
8. Using a stripper, remove a flange from forward part of the driveshaft.
9. Install the driveshaft in a vice so that the central bearing leaned on sponges of a vice and, using a copper hammer, beat out forward part of the driveshaft from the bearing.
10. Check a condition of the central bearing of the driveshaft, thus the internal ring of the bearing has to rotate smoothly and without jammings.
11. Installation is made in sequence, the return to removal. Thus it is necessary to combine all earlier put tags.