Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
- 9. Coupling, shaft
   9.1. Technical characteristics
   + 9.2. Coupling
   - 9.3. Driveshaft
      9.3.1. Removal and installation of the driveshaft
      9.3.2. Replacement of the central bearing of the driveshaft
      9.3.3. Replacement of a sealing ring of the main transfer
   + 9.4. Power shafts
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


. 3a942d17



9.3.1. Removal and installation of the driveshaft

Removal

PERFORMANCE ORDER
1. Lift the car and record on supports.
2. Put with chalk or white paint tags of a relative positioning of different components for ensuring the correct subsequent installation. It is especially important to note an arrangement of back part of the driveshaft in relation to a flange of the main transfer.
3. Unscrew the bolts and nuts fixing back part of the driveshaft to a flange of the main transfer.
4. Unscrew bolts of fastening of an arm of the central bearing (are specified by shooters).
5. Lower the driveshaft down and shift it back. At removal of the driveshaft the forward shlitsevy coupling will leave gearing with the conducted transmission shaft.

Installation

PERFORMANCE ORDER
1. Before installation of the driveshaft grease vents on forward part of the driveshaft with transmission liquid and, being careful not to damage a sealing ring, install the driveshaft in a transmission.
2. Further installation is made in sequence, the return to removal.