Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Introduction
      8.2.2. Technical characteristics
      8.2.3. Diagnostics of leak of operational liquids
      8.2.4. Lever and cable of gear shifting
      8.2.5. Cable of a choice of transfers
      8.2.6. Switch of blocking of a starter and light of a backing
      8.2.7. Replacement of sealing rings
      8.2.8. Check and replacement of support of a transmission
      8.2.9. Adjustment of a brake tape
      8.2.10. Removal and installation of a transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17


8.2.8. Check and replacement of support of a transmission

GENERAL INFORMATION

Support of an automatic transmission


PERFORMANCE ORDER
1. Lift the car and record on supports.
2. Insert the lever between a forward beam and a transmission, and pressing the lever, try to move a transmission. If movement of a transmission considerable, it is necessary to check a state, and perhaps and to replace transmission support.
3. To replace a transmission support, unscrew the bolts fixing a support to a beam and a transmission.
4. A jack raise a transmission and remove transmission support.
5. Installation is made in sequence, the return to removal.