Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Introduction
      8.2.2. Technical characteristics
      8.2.3. Diagnostics of leak of operational liquids
      8.2.4. Lever and cable of gear shifting
      8.2.5. Cable of a choice of transfers
      8.2.6. Switch of blocking of a starter and light of a backing
      8.2.7. Replacement of sealing rings
      8.2.8. Check and replacement of support of a transmission
      8.2.9. Adjustment of a brake tape
      8.2.10. Removal and installation of a transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17


8.2.2. Technical characteristics

GENERAL INFORMATION

Tightening moments

Adjustment of a brake tape:
  – screw:
     • stage 1
8,0 Nanometer
     • stage 2
to unscrew on 3 turns
  – lock-nut
25 – 28 Nanometers
Shift adjustment nut
5 – 8 Nanometers
Bolts of fastening of the hydrotransformer
23 – 26 Nanometers
Transmission to the engine:
  – lower nuts
from 34 to 40 Nanometers
  – top bolt
from 34 to 40 Nanometers