| 1. Take off a gear belt and a pulley of a cranked shaft. |
|
|
2. Using a screw-driver which edge is wound by an adhesive tape, take a sealing ring of a cranked shaft from a nest. Thus do not damage a nest of a sealing ring and a cranked shaft. For simplification of removal of a sealing ring it is possible to cut out an opening in a face surface of a sealing ring. |
| 3. Clear a nest of a sealing ring and oil a new sealing ring the pure engine. |
|
4. Using a tubular mandrel of the corresponding diameter, establish a sealing ring on a cranked shaft. |
| 5. Establish a pulley of a cranked shaft and a gear belt. |
