Subaru Legacy

since 1990-1998 release

Repair and operation of the car

Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   - 8.1. Mechanical transmission
      8.1.1. Introduction
      8.1.2. Technical characteristics
      8.1.3. Gear shifting lever
      8.1.4. Check and replacement of support of a transmission
      8.1.5. Switches of light of a backing and neutral situation KP
      8.1.6. Removal and installation of a transmission
   + 8.2. Automatic transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment

�� http://arskam.ru.

8.1.3. Gear shifting lever

GENERAL INFORMATION

Details of the lever of gear shifting of models 4WD

1 – gear shifting lever handle
2 – protective cover
3 – plate of a protective cover
4 – gear shifting lever
5 – plug
6 – axis
7 – collars
8 – basis
9 – lock ring
10 – sealing ring of round section

11 – plug
12 – brekker
13 – draft
14 – hinge
15 – draft of gear shifting
16 – arm
17 – spring
18 – shock-absorber
19 – draft

On models 2WD the lever of gear shifting is similar.

Removal

PERFORMANCE ORDER

1. Unscrew the handle from the gear shifting lever.
2. Remove the central console and a cover of the lever of gear shifting.
3. Unscrew screws of fastening of a plate of a cover of the lever of gear shifting and remove a plate from a car floor.
4. Lift the car and record on supports.
	5. Disconnect the forward end of draft of the shock-absorber from a transmission, having unscrewed bolts (are specified by shooters).
	6. Remove a spring of draft of the shock-absorber.
	7. Disconnect the forward end of draft of gear shifting from a transmission.
8. Installation is made in sequence, the return to removal.