Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
- 7. Systems of start, ignition
   7.1. Introduction
   7.2. Technical characteristics
   7.3. Check of the accumulator
   7.4. Battery charging
   7.5. Accumulator
   + 7.6. System of ignition
   + 7.7. System of charging
   + 7.8. System of start of the engine
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


mam0.ru


7.5. Accumulator

Removal and installation

PERFORMANCE ORDER
1. Disconnect at first the negative, and then positive plug from the accumulator.
2. Unscrew nuts (are specified by shooters) and remove a clip of fastening of the accumulator.
3. Take the accumulator from a motor compartment.
4. Installation is made in sequence, the return to removal. Thus at first connect the positive plug of the accumulator, and then negative. After connection of plugs to the accumulator grease them with technical vaseline.