Subaru of Legasi + 1.1. Identification numbers + 2. Maintenance + 3. Engines - 4. Heating, ventilation + 4.1. Cooling system + 4.2. System of heating - 4.3. Air conditioning system 4.3.1. Check of the air conditioning system 4.3.2. Coolant addition 4.3.3. Receiver / dehumidifier 4.3.4. Compressor 4.3.5. Condenser 4.3.6. Evaporator 4.4. System of climate control + 5. Fuel system + 6. Exhaust system + 7. Systems of start, ignition + 8. Transmissions + 9. Coupling, shaft + 10. Brake system + 11. Suspension bracket + 12. Steering + 13. Body + 14. Electric equipment
|
Compressor of the air conditioning system
1 – compressor 2 – arm 3 – tension mechanism 4 – driving belt |
5 – casing of a driving belt 6 – arm 7 – arm |
The compressor of the air conditioning system is installed on the forward left side of a motor compartment and is given by a belt from a pulley of a cranked shaft. Removal
PERFORMANCE ORDER |
1. Discharge the air conditioning system. |
2. Weaken the mechanism of a tension of a driving belt and take off a driving belt of the compressor. On later models before removal of the compressor remove the generator. |
|
3. Having unscrewed fastening bolts (are specified by an arrow), disconnect pipes of supply of coolant to the compressor. |
4. Disconnect the electric socket from the compressor. |
5. Unscrew bolts and remove the compressor. |
|
Installation
Prevention
At installation of the new compressor it is necessary to establish a new receiver / dehumidifier also.
PERFORMANCE ORDER |
1. At installation of the new compressor merge oil from the old compressor in a measuring test tube. Fill in the same amount of new oil in the new compressor. |
2. Install the compressor and fix bolts. |
3. Connect coolant pipes to the compressor, previously having established new sealing rings and having oiled them. |
4. Further installation is made in sequence, the return to removal. |
|
|
|