Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
- 4. Heating, ventilation
   - 4.1. Cooling system
      4.1.1. Introduction
      4.1.2. Technical characteristics
      4.1.3. Antifreeze
      4.1.4. Check and replacement of the thermostat
      4.1.5. Check and replacement of the fan of a radiator and relay
      4.1.6. Radiator
      4.1.7. Broad tank
      4.1.8. Water pump
      4.1.9. Sensor of temperature of cooling liquid
   + 4.2. System of heating
   + 4.3. Air conditioning system
   4.4. System of climate control
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment





4.1.6. Radiator

GENERAL INFORMATION

Radiator and fan

1 – casing
2 – fan
3 – stopper
4 – hose
5 – arm
6 – broad tank
7 – collar
8 – top hose of a radiator
9 – lower hose of a radiator
10 – radiator suspension bracket
11 – top laying
12 – stopper of removal of air
13 – radiator
14 – lower laying
15 – radiator
16 – an inlet hose from a transmission
17 – a final hose from a transmission
18 – collar
19 – metal pipelines
20 – an inlet hose from a transmission
21 – a final hose from a transmission

Replacement
Prevention

Make replacement of a radiator on the cold engine.


PERFORMANCE ORDER
1. Merge cooling liquid from the cooling system.
2. Remove a weight wire from the accumulator.
3. Weaken collars (are specified by shooters) and remove hoses from a radiator.
4. On models with an automatic transmission disconnect hoses from the oil heater.
5. Disconnect the electric socket of the engine of the fan of a radiator and the tire of grounding of a radiator.
6. Unscrew bolts of fastening of a radiator (are specified by shooters).
7. Remove a radiator, lifting it from rubber pillows up.
8. Installation is made in sequence, the return to removal.
9. Fill in cooling liquid in the cooling system.