Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
- 4. Heating, ventilation
   - 4.1. Cooling system
      4.1.1. Introduction
      4.1.2. Technical characteristics
      4.1.3. Antifreeze
      4.1.4. Check and replacement of the thermostat
      4.1.5. Check and replacement of the fan of a radiator and relay
      4.1.6. Radiator
      4.1.7. Broad tank
      4.1.8. Water pump
      4.1.9. Sensor of temperature of cooling liquid
   + 4.2. System of heating
   + 4.3. Air conditioning system
   4.4. System of climate control
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


, .


4.1.3. Antifreeze

GENERAL INFORMATION

Measurement of density of antifreeze


Prevention

Do not allow hit of cooling liquid on clothes and a paint and varnish covering of a body. Otherwise wash out a surface a plentiful amount of water.


Antifreeze represents mix of the distilled water with an ethylene glycol concentrate. Antifreeze provides protection of the cooling system against corrosion and increases a boiling point of cooling liquid. The amount of ethylene glycol in antifreeze depends on weather service conditions of the car and usually makes from 40 to 70%. For definition temperatures of freezing of antifreeze need to be taken its density.