Subaru Legacy

since 1990-1998 release

Repair and operation of the car

Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   - 8.1. Mechanical transmission
      8.1.1. Introduction
      8.1.2. Technical characteristics
      8.1.3. Gear shifting lever
      8.1.4. Check and replacement of support of a transmission
      8.1.5. Switches of light of a backing and neutral situation KP
      8.1.6. Removal and installation of a transmission
   + 8.2. Automatic transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment

8.1.5. Switches of light of a backing and neutral situation KP

GENERAL INFORMATION

Arrangement of the switch of light of a backing

The switch of light of a backing (it is specified by an arrow) is located on the left side of a back case of a transmission.

Switches of light of a backing and the neutral provision of a transmission are located on the forward party of a back case (model 2WD) or on a case of a transmission (model 4WD).

Check

PERFORMANCE ORDER

1. Lift the car and record on supports.
	2. For check of the switch disconnect the electric socket located on wires of the switch and connect an ohmmeter to the socket (it is specified by an arrow) the switch.
	3. For check of the switch of light of a backing include a reverse gear and check that resistance between contacts of the switch equally 0. Include any other transfer and check that resistance between contacts of the switch equally to infinity.
4. For check of the switch of neutral provision of a transmission install the transmission lever in neutral situation and, using an ohmmeter, check the switch resistance which has to be equal 0. At inclusion of any transfer resistance of the switch of neutral situation has to be equal to infinity.

Replacement

PERFORMANCE ORDER

For replacement of switches disconnect the electric socket from the switch and unscrew the switch from a transmission.