Subaru Legacy

since 1990-1998 release

Repair and operation of the car

Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   - 8.1. Mechanical transmission
      8.1.1. Introduction
      8.1.2. Technical characteristics
      8.1.3. Gear shifting lever
      8.1.4. Check and replacement of support of a transmission
      8.1.5. Switches of light of a backing and neutral situation KP
      8.1.6. Removal and installation of a transmission
   + 8.2. Automatic transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment

8.1.4. Check and replacement of support of a transmission

GENERAL INFORMATION

Support of a transmission of models of 1996

1 – support
2 – back support
3 – back beam
4 – central beam
5 – laying
6 – back plate

7 – forward beam
8 – laying
9 – laying
10 – forward plate
11 – laying

PERFORMANCE ORDER

1. Lift the car and record on supports.

2. Insert the lever between a forward beam and a transmission, and pressing the lever, try to move a transmission. If movement of a transmission considerable, it is necessary to check a state, and perhaps and to replace transmission support.

3. To replace a transmission support, unscrew the bolts fixing a support to a beam and a transmission.

4. A jack raise a transmission and remove transmission support.

5. Installation is made in sequence, the return to removal.