|
FORWARD SUSPENSION BRACKET
Course instability of the car:
– wrong installation of corners of forward wheels;
– spherical hinges of steering drafts are worn-out.
Hard steering:
– wrong installation of forward wheels;
– low pressure in tires.
Beating of wheels or vibration:
– the wheel is not balanced;
– the wheel is deformed;
– wrong installation of corners of forward wheels;
– the forward rack is faulty;
– weak spring of a forward suspension bracket.
Car inclination at turns and braking:
– the rack of a forward suspension bracket is faulty;
– weak spring of a forward suspension bracket.
Squeal of tires on turns:
– wrong installation of corners of forward wheels;
– pressure in tires does not meet standard.
Uneven wear of tires:
– pressure in tires does not meet standard;
– wrong installation of corners of forward wheels;
– the nave bearing is worn-out.
BACK SUSPENSION BRACKET
Course instability of the car:
– the rack is faulty;
– weak spring of a suspension bracket;
– the nave bearing is worn-out or incorrectly adjusted;
– the suspension bracket lever plug is worn-out.
STEERING
Rigid steering:
– there is not enough greasing in steering transfer;
– jamming in the spherical hinge of steering draft;
– jamming of the spherical hinge of the lower lever.
The increased side play of a steering wheel:
– wear of spherical hinges of steering draft;
– wear of teeths of a gear lath.
STEERING WITH THE AMPLIFIER
The main malfunctions same, as well as in a steering without amplifier plus the following:
Hard management:
– pro-slipping of a belt of the drive of the pump of the amplifier;
– availability of air in a hydraulic system of the amplifier;
– wrong installation of corners of forward wheels.
Noisy operation of the pump:
– the pulley on the pump is not fixed;
– leaks in a hydraulic system;
– low level of liquid in a tank. |
