Subaru Legacy

since 1990-1998 release

Repair and operation of the car

Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Introduction
      8.2.2. Technical characteristics
      8.2.3. Diagnostics of leak of operational liquids
      8.2.4. Lever and cable of gear shifting
      8.2.5. Cable of a choice of transfers
      8.2.6. Switch of blocking of a starter and light of a backing
      8.2.7. Replacement of sealing rings
      8.2.8. Check and replacement of support of a transmission
      8.2.9. Adjustment of a brake tape
      8.2.10. Removal and installation of a transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment

8.2.6. Switch of blocking of a starter and light of a backing

GENERAL INFORMATION

Arrangement of contacts on the electric socket of the switch of blocking of a starter and light of a backing on early models

Arrangement of contacts of the electric socket of the switch of blocking of a starter and light of a backing on late models

Condition of contacts of the switch of blocking of a starter and light of a backing depending on position of the lever of a choice of transfers

Check

Check that start of the engine is possible only in the position PARK or NEUTRAL of the lever of a choice of transfers and that lamps of a backing join only at inclusion of a reverse gear.

Adjustment

PERFORMANCE ORDER

1. Lift the car and record on supports.
	2. Disconnect the electric socket from the switch.
	3. Weaken bolts of fastening of the switch of blocking of a starter and light of a backing (are specified by shooters).
4. Connect an ohmmeter to the corresponding contacts of the electric socket of the switch and move the switch to such situation when there is a disconnection of contacts of the switch of blocking of a starter (see rice. An arrangement of contacts on the electric socket of the switch of blocking of a starter and light of a backing on early models, rice. An arrangement of contacts of the electric socket of the switch of blocking of a starter and light of a backing on late models, rice. A condition of contacts of the switch of blocking of a starter and light of a backing depending on position of the lever of a choice of transfers).
5. Tighten bolts of fastening of the switch.

Replacement

PERFORMANCE ORDER

1. Lift the car and record on supports.
2. Disconnect the electric socket from the switch.
3. Disconnect a cable of a choice of transfers from the lever on a transmission.
	4. Unscrew the nut fixing the lever of a choice of transfers to a shaft on a transmission.
5. Remove the lever from a shaft.
6. Unscrew bolts and remove the switch of blocking of a starter and light of a backing.
7. Installation is made in sequence, the return to removal.