Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru of Legasi
+ 1.1. Identification numbers
+ 2. Maintenance
- 3. Engines
   3.1. Technical characteristics
   3.2. Operations on repair of the engine installed in the car
   3.3. Top dead point of the first cylinder
   3.4. Cover of a head of the block of cylinders
   3.5. Inlet collector
   + 3.6. Gear belt and pulleys
   3.7. Replacement of a forward sealing ring of a cranked shaft
   3.8. Replacement of sealing rings of camshafts
   3.9. Camshafts and pushers
   3.10. Heads of the block of cylinders
   3.11. Oil pallet
   3.12. Oil pump
   3.13. Drive flywheel / plate
   3.14. Replacement of a back sealing ring of a cranked shaft
   3.15. Suspension bracket of the power unit
   + 3.16. Capital repairs of the engine
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


3a942d17

3.14. Replacement of a back sealing ring of a cranked shaft

PERFORMANCE ORDER
1. Remove a transmission and a flywheel.
2. The easiest way of extraction of an old sealing ring consists in that a screw-driver to hook on a sealing ring and to take it from a nest.
3. Also sealing ring can be taken from a nest if to drill two small openings located in the opposite ends of a sealing ring in a ring.
4. Screw in two self-cutting screws in the drilled openings of a sealing ring and, using flat-nose pliers, extend a sealing ring for heads of screws.
5. Grease working edges and an external surface of a new sealing ring with pure engine oil and, using a tubular mandrel of the corresponding diameter, establish a back sealing ring of a cranked shaft.
6. Further installation is made in sequence, the return to removal.